G-F9TWST4PEM dc80651f7555dfbe53bde62480da6bba

FACP Sign (Aluminium Reflective Signs, RED 7x10)

Write a Review
UPC:
745528296770
Availability:
USUALLY SHIP WITH IN 1-2 BUSINESS DAY
  • FACP Sign
  • FACP  Signage
  • FACP
  • Sign FACP
  • FACP  Back
  • FACP  BuildingSigns
$9.99
Frequently bought together:

Description

FACP SIGN -

White Size 7 Inch x 10 Inch Sign Thickness 0.4MM Sign letters color: White Sign background Color: White Sign .Sign material: Aluminium. Reflective Sign"

 

This is an aluminum “FACP” SIGN with holes for heavy duty installation. In NYC use/ post sign to inform tenants/owners/guests/officers/Fire Department Crew of F.A.C.P. in facility with proper HPD designation and aluminum signs for the fire alarm control panel room

 

Shipping and Handling Cost:

Our Shipping is fixed whether you buy 1 item or 20 item (We ship within USA only) do not miss this opportunity to buy all sign needed at no additional shipping cost.

 

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

 

Notice:

The requirement for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of sign. We makes no warranty or representation of suitability of sign for any specific application. It IS THE CUSTOMER'RESPONSIBILITY TO ENSURE THAT THE SIGHS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL,LOCAL AND MUNICIPAL LAWS. Please review term and conditions prior to purchase. For more information about what is required, see the laws that are referenced and the rules applicable to your city and stare. Thsi page is for informational purposes only and is not intended a legal advice, professional advice or a statement of law.You may wish to consult with a attorney.

 

DISCLAIMER to comply with the New York City Consumer Protection Law which applies to all businesses operating in New York City. HPD-signs.com is small family operated Brooklyn-based business. HPD-signs.com is not a City of New York store nor are the website, products or services affiliated with the City of New York City or any agency of the City of New York. HPD-signs.com itself, its business,website, products.services or any hyperlinks from its website are not sponsored by, approved by, affiliated with, endorses by, or connected to the City of New York or any agency of the City of New York. including

"

 

The “Fire alarm control panel” sign, also know as “FACP” sign, is designed to inform 1st respondents from the fire department of the location of the Fire alarm control panel. A fire alarm control panel (FACP) can also be named fire alarm control unit (FACU), or simply fire alarm panel.
 

The FACP  is the controlling component of the fire alarm system. The panel receives information from devices designed to detect and report fires, monitors their operational integrity and provides for automatic control of equipment, and transmission of information necessary to prepare the facility for fire based on a predetermined sequence. The panel may also supply electrical energy to operate any associated initiating device, notification appliance, control, transmitter, or relay. There are four basic types of panels: coded panels, conventional panels, addressable panels, and multiplex systems

 

Frequently asked questions:

How does fire alarm control panel work? Conventional panels represent a building as a series of regions known as detection zones. When a smoke detector or pull switch in a zone activates, the electrical current to the fire alarm panel changes, and the control panel indicates that a device somewhere in that zone has been activated.

What is the difference between an annunciator panel and a fire alarm control panel? If the fire alarm panel is the heart of the system, then the annunciator is the interface that actually shows you what's going on, and where. Fire alarm annunciators are used to pinpoint the trouble spots, and help the staff monitor the entire building

 

What information will the fire alarm panel be used to display? In an alarm condition, the fire alarm panel indicates where the alarm originated. The alarm panel can be reset once the device which initiated the alarm is reset, such as returning the handle of a manual pull station to its normal position

 

What are the components of a fire alarm system? Most fire alarm systems are made up of the following components:

ü  Fire Alarm Control Panel (FACP)

ü  Primary and Backup Power Supply.

ü  Alarm Initiating Device.

ü  Alarm Notification Device.

ü  Remote Control and Display Panels.

ü  Building Safety Interface

View AllClose

Warranty Information

All products are warrantied by HPDSIGNS.NYC to be free of defects in material or workmanship, at the time of shipment. HPDSIGNS.NYC liability shall be limited to replacement of the product, if it can be determined that the product was defective at the time of shipment. Defective products, subject to the inspection by HPDSIGNS.NYC, will be replaced or repaired on a no charge basis. Damage caused by, accidents, or improper use, is the responsibility of the Buyer. HPDSIGNS.NYC is not responsible for misuse of the products, or if the Buyer is unable to use the product. This warranty is in lieu of any other warranty expressed or implied. All shipping costs related to returning the product to the Manufacturer for inspection will be prepaid by the buyer. Shipping costs will be reimbursed if parts are determined to be defective. Shipping non-defective parts back to the Buyer will be paid by the Buyer. All expenses, losses in revenue, and labor charges arising or originating from the failure of defective parts will be borne by the Buyer. The requirements for sign content are determined by intended use and by applicable regulation. BUYER is responsible for determining the appropriate content for a sign. HPDSIGNS.NYC makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. The Warranty excludes natural aging of the unit, discoloration, ordinary wear and tear, ordinary weathering, sunlight fading, or rust. It excludes staining caused by mold, mildew or tree sap and damage caused by animals including insects, vermin or household pets. The warranty does not cover damage caused by Acts of Nature including but not limited to: wind in excess of 65 mph; tornado; hurricane; microburst; hail; flood; blizzard; extreme heat; pollution or fire events. The following actions void the warranty: improper assembly; use above intended and reasonable capacity; misuse; abuse; modification; cleaning with abrasive tools, exposing the unit to heat sources and vandalism. Painting, sandblasting, cleaning with harsh chemicals not recommended voids the warranty . Modification of the original product voids all warranties. HPDSIGNS.NYC assumes no liability for any modified product .HPDSIGNS.NYC is not responsible for: loss of use of the unit; labor for repair; inspection fees or disposal costs. THIS WARRANTY IS NONTRANSFERABLE. IT IS VALID FOR 90 DAYS FROM PURCHASE DATE. THE WARRANTY IS VOIDED AFTER 90 DAYS. HPDSIGNS.NYC AND BUILDINGSIGNS.COM HEREUNDER IS LIMITED SOLELY TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT OR PART AND IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM ANY DEFECT IN MATERIAL OR WORKMANSHIP OR FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.
View AllClose