Description

Dry PRESSURIZED Standpipe System Sign

Size 6 Inch x 12 Inch
Sign Material: Aluminium
Sign has mounting holes in each corner. Round Corner Sign Thickness 0.02''
Sign letters Color: White
Sign background color: WHITE
Sign Type: Wall Mounted.

A Dry Pressurized Standpipe System Sign is a type of signage used in buildings, particularly commercial and industrial structures, to indicate the presence and location of a dry standpipe system. A standpipe system is a network of pipes and valves designed to supply water to firefighters during a fire emergency. It allows firefighters to connect their hoses to the building's water supply, providing them with a readily available source of water to combat fires on upper floors or in remote areas of the building.

A "dry" standpipe system means that the pipes are normally empty of water, but they can be pressurized with water from a fire department pumper truck when needed. This is in contrast to "wet" standpipe systems, where the pipes are always filled with water.

The Dry Pressurized Standpipe System Sign typically includes relevant information such as the words "Dry Standpipe," an arrow pointing towards the location of the standpipe connection, and sometimes additional text or symbols to guide firefighters to the correct spot. These signs are essential for emergency responders to quickly locate and utilize the standpipe system in a fire situation, enabling them to efficiently fight fires and save lives.

Dry Standpipe Signs are designed to inform fire department officers and concerned parties of the type of sprinkler system in the building at hand. A dry standpipe system presents a network of in-place pipework allowing connections between a water supply (usually a fire department mobile apparatus known as a pumper) and a dedicated inlet at street level; With hose outlet valves on each floor.

Frequently asked Questions about dry standpipe and standpipe systems:

What is a dry standpipe ? With dry standpipes, the standpipe extends into the building to supply fire fighting water to the interior of the structure via hose outlets; Often located between each pair of floors in stairwells in high- rise buildings, dry standpipes are not filled with water until needed.

What is a manual dry standpipe? Automatic Dry Standpipe systems are only designed to have water in the system piping when the system is in use. Manual Dry Standpipe systems are for fire department use exclusively and require a fire department pumper to supply the needed pressure and water supply through a fire department connection

There are four types of standpipes that you will find in use:

· Wet system with water in the pipes at all times; It is supplied by a water source. The pressure in the system is maintained constantly.

· Automatic dry standpipe with air stored always inside the standpipe at a constant pressure; When a hose valve is opened, the air escapes allowing the water to enter into the standpipe system.

· Semi-automatic dry standpipe with air stored inside the pipes, which can be either pressurized or not pressurized; With it water then enters the system, when an actuation device such as a manual pull station or an electrical switch is activated.

· Manual dry standpipe system only with pipes feeding the system; With neither air nor water in them; For water to be supplied through the standpipe, a fire apparatus must be used.

Shipping and Handling Cost:

Our Shipping is fixed whether you buy 1 item or 20 item (We ship within USA only) do not miss this opportunity to buy all sign needed at no additional shipping cost.

Sales Tax:

We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.

Notice:

The requirement for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of sign. We makes no warranty or representation of suitability of sign for any specific application. It IS THE CUSTOMER'RESPONSIBILITY TO ENSURE THAT THE SIGHS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL,LOCAL AND MUNICIPAL LAWS. Please review term and conditions prior to purchase. For more information about what is required, see the laws that are referenced and the rules applicable to your city and stare. Thsi page is for informational purposes only and is not intended a legal advice, professional advice or a statement of law.You may wish to consult with a attorney.

DISCLAIMER to comply with the New York City Consumer Protection Law which applies to all businesses operating in New York City. HPD-signs.com is small family operated Brooklyn-based business. HPD-signs.com is not a City of New York store nor are the website, products or services affiliated with the City of New York City or any agency of the City of New York. HPD-signs.com itself, its business,website, products.services or any hyperlinks from its website are not sponsored by, approved by, affiliated with, endorses by, or connected to the City of New York or any agency of the City of New York. including

View AllClose

Warranty Information

All products are warrantied by HPDSIGNS.NYC to be free of defects in material or workmanship, at the time of shipment. HPDSIGNS.NYC liability shall be limited to replacement of the product, if it can be determined that the product was defective at the time of shipment. Defective products, subject to the inspection by HPDSIGNS.NYC, will be replaced or repaired on a no charge basis. Damage caused by, accidents, or improper use, is the responsibility of the Buyer. HPDSIGNS.NYC is not responsible for misuse of the products, or if the Buyer is unable to use the product. This warranty is in lieu of any other warranty expressed or implied. All shipping costs related to returning the product to the Manufacturer for inspection will be prepaid by the buyer. Shipping costs will be reimbursed if parts are determined to be defective. Shipping non-defective parts back to the Buyer will be paid by the Buyer. All expenses, losses in revenue, and labor charges arising or originating from the failure of defective parts will be borne by the Buyer. The requirements for sign content are determined by intended use and by applicable regulation. BUYER is responsible for determining the appropriate content for a sign. HPDSIGNS.NYC makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. The Warranty excludes natural aging of the unit, discoloration, ordinary wear and tear, ordinary weathering, sunlight fading, or rust. It excludes staining caused by mold, mildew or tree sap and damage caused by animals including insects, vermin or household pets. The warranty does not cover damage caused by Acts of Nature including but not limited to: wind in excess of 65 mph; tornado; hurricane; microburst; hail; flood; blizzard; extreme heat; pollution or fire events. The following actions void the warranty: improper assembly; use above intended and reasonable capacity; misuse; abuse; modification; cleaning with abrasive tools, exposing the unit to heat sources and vandalism. Painting, sandblasting, cleaning with harsh chemicals not recommended voids the warranty . Modification of the original product voids all warranties. HPDSIGNS.NYC assumes no liability for any modified product .HPDSIGNS.NYC is not responsible for: loss of use of the unit; labor for repair; inspection fees or disposal costs. THIS WARRANTY IS NONTRANSFERABLE. IT IS VALID FOR 90 DAYS FROM PURCHASE DATE. THE WARRANTY IS VOIDED AFTER 90 DAYS. HPDSIGNS.NYC AND BUILDINGSIGNS.COM HEREUNDER IS LIMITED SOLELY TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT OR PART AND IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM ANY DEFECT IN MATERIAL OR WORKMANSHIP OR FROM THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.

View AllClose